7010x DGS-2 Ultraflexible microphone cable (single shielded) for OEM

DGS-2 (70101-70108)  See alternative new GAC-2a
Balanced microphone cable with single shield, high flexible, velvet faint PVC-Jacket.  
Industrial standard clone product very similar to competition products of the industry.
Ecconomical standard shielding. Very competitive prices possible for larger orders.
Limited availability possible. Check our OEM prices and special branded productions just for you!
OEM production with choice of color, label, spool sizes and diameter possible for order of 10'000m / color. Check for stock on hand at special prices

Oxygen free (LCOF) higher grade 100% pure copper at best standards for best performance.
 
 

Construction:
1 = Jacket: PVC, 6.0 mm max. Ø
2 = Shield: Copper wires, (0.10 mm) 100% coverage
3 = Filling material: Viscose
5 = Insulation: PE 1.50 mm Ø red & blue
6 = Conductor: Stranded bare copper wires 28 x 0.10 mm (0.22mm²) 28x38AWG = 24AWG

Technical Datas:
Conductor resistance:    < 85 ohm/km
Shielding resistance:    < 40 Ohm/km
Insulation resistance:    > 200 MOhm/km
Capacitance: cond/cond:  < 62 nF/km
  cond/shield:  < 116 nF/km
Test voltage: cond/cond:  500 veff
  cond/shield:  1000 veff
Temperature range: flexi-installed: -5° to +50° C
  fix-installed: -30° to +70° C

Ordering Information:

Order No. Type Diameter Colour Spool Size Weight/
Spool		  Shipping Unit
70101 DGS-2 6.0 mm red 100m 4.50 kg 4x100m
70104 DGS-2 6.0 mm blue 100m 4.50 kg 4x100m
70106 DGS-2 6.0 mm yellow 100m 4.50 kg 4x100m
70108 DGS-2 6.0 mm black 100m 4.50 kg 4x100m
  .
 
Please inquire via contact and avoid entering all datas. You can also simply send us an email to info@gothamaudio.us
No minimum order!
Gotham Cables are available from our Swiss service lab soldered as per your desires.
Each cable is being made in our own service lab by our own staff at highest standards and to your specification.
Visit our soldering department here:  LINK 


       

Balanced XLR wiring instruction: 
Pin1= shields, Pin2= brown (Signal+),  Pin3= white (Signal -).
Should space not allow to solder all strands of the many shields, you can put only each a few strands of each layer of the shields to ground Pin 1. Cut away any spare strands from the shields and secure that no loose strands are hanging around. Use a shrinking tube to avoid short ciricuits. We do not recommend to put any ground to the body shell on either side of your XLR line. The connector shell will get to ground once plugged into a receptacle.
 
Having your shields put on the connectors shell is dangerous! Imagine, a loose cable can make contact with another loose cable connector having a different ground potential. So the metal connector is conductive and shall not carry your audio ground used on the shieldings of your audio signal. It can interfere with other "grounds" such as video, data of power grounds, which are potentially different! So keep "grounds" separate!

RCA/Phono/Jack unbalanced wiring using balanced wire:
Many clients use our balanced  2 conductor cable also for unbalanced interconnects. In this case we recommend to only use 1 conductor (brown) for your signal and put all other wires or parts thereof to ground with the shields. This will increase your noise protection! However for unbalanced application we do have our perfect unbalanced wires 1001x, and 1000x.
Unbalanced Stereo & 2 Channels (loop) application:
We actually do not support the idea to use a 2 conductor cable for stereo unbalanced wiring, however it will be done and can be made with acceptable compromise regarding crosstalk and similar. Again all the shields to ground but not to the body shell of your XLR connector. Check our perfect stereo cables 12001/13001 or our conductor shielded Starquad 11301 for real quality stereo wiring!