10652 GAC-2/foil AES Digital installation 110 Ohm cable with foil shield

Digital installation cable with 110 Ohm impedance for installation in AES/EBU digital audio systems. Precise impedance run over the whole cable with quad-twisted strands (3). Large conductor diameter for accurate attenuation without skin-effect disturbances. Aluminiumfoil is melt with jacket for easy removal of the shield with one handling. Drain wire for quick ground connection. Solid wire connection to IDT strips (such as Krone). Similar cable as FRNC Version available 10660

LFOC higher grade copper at best standards for best performance.
This cable is also capable to be used for DMX or analog audio signals.

 
 

Construction:
1 = Jacket: PVC, Ø 4.5mm, purple
2 = Foil shield: PVC-coated aluminiumfoil
3 = Drain wire: 0.4mm tinned copper wire
4 = Stabilisation: PE foil
5 = Cord (2): PVC-strand 1.3mm, quad twisted with conductors
6 = Insulation: Foam-skin PE, 1.3mm diameter, red and white
7 = Conductor: Solid tinned copper wire, 0.5mm (0.19 mm²)  24AWG

Technical Datas:
Conductor resistance:   < 90 Ohm/km
Attenuation: at 1 MHz: 2.5 dB/100m
  at 6 MHz: 6.5 dB/100m
Capacitance:   < 55 nF/km
Insulation resistance:   > 10 GOhm/km
Characteristic impedance: at 1-6 MHz 110 Ohm ± 10%
Test voltage: cond/cond: 500 Veff
  cond/shield: 2000 Veff
Temperature range: flexi-installed: -5° to +50° C
  fix-installed: -30° to +70° C
 

Ordering Information:

Order No. Type Diameter Colour Spool Size Weight/
Spool		  Shipping Unit
10652 GAC-2/foil
AES/EBU		 4.5 mm purple 200m 4.65 kg 4x150m
 
 

Please inquire via contact and avoid entering all datas. You can also simply send us an email to info@gothamaudio.us
No minimum order!
Gotham Cables are available from our Swiss service lab soldered as per your desires.
Each cable is being made in our own service lab by our own staff at highest standards and to your specification.
Visit our soldering department here:  LINK